JRC JMR-7230-S Instruction Manual page 575

16.2.15 Set display of danger detection highlight
When you select [Graphical Indication] in the classification pane, the [Graphical Indication] dialog box
appears in the edit pane.
The descriptions of settings are shown in the table below.
Setting Item
Graphical Indication for
the Charted Feature
object
Crossing Safety
Contour
Navigational Hazards
Prohibited Areas and
Areas with Special
Conditions
Settings for
Depth/Safety Contour
Settings for
Look-ahead
Settings for Special
Condition Area
Description of Setting
Select and enable the highlighting function of the
detection object on the chart
Activate the partial highlight display function of the
object where the execution result of Safety Check
becomes Crossing Safety Contour error.
Activate the partial highlight display function of the
object where the execution result of Safety Check
becomes Navigational Hazards
Prohibited Area or Areas with Special Condition
activates the partial highlighting function of the error
part.
Click to open the Depth / Safety Contour screen of the
Alert setting.
Click to open the Look-ahead
setting.
Click to open the Special Condition Area
Alert setting.
16-53
error.
screen of the Alert
screen of the
Section 16 Setting up Screen View
Setting Value
To enable: Select.
To disable: Clear.
To enable: Select.
To disable: Clear.
To enable: Select.
To disable: Clear.
To enable: Select.
To disable: Clear.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
付録