Entering The Ship's Heading/Own Ship's Speed Manually - JRC JMR-7230-S Instruction Manual

8.15.2 Entering the ship's heading/own ship's speed
manually
When the device (example: LOG) that is connected to this equipment fails to function, the target
tracking device and true motion display can be used by entering the ship's heading/own ship's speed
manually by using the following procedure.
1
Select [Menu] from the corresponding combo box.
The [Sensor Selection/Status] dialog box appears.
2
To enter the ship's heading manually, select [Manual] from the [Heading] combo box.
To enter the ship's own speed manually, select [Manual] from the [STW] combo box.
3
Click on the input combo box.
4
Enter numeric values through the software keyboard.
Section 8 Functions of the ECDIS (Option) 8-62