JRC JMR-7230-S Instruction Manual page 492

14.10.6.1 Creating a text by specifying the latitude and longitude
1.
Click on the [Enter POSN] button on the drawing toolbar.
The [Enter Position] dialog box appears (Refer to "14.2.6 Creating an object by specifying
latitude and longitude".)
2.
Enter the latitude and longitude of the object to be created and click on the [Enter]
button.
An object is created on the specified latitude and longitude and the property information is
reflected in the object property dialog box. (Refer to "14.2.8 Object property dialog box".)
3.
Adjust the parameters on the object property dialog box.
For the text input method, refer to "14.5.6.3 Editing a text", for the template usage method, refer
to "14.5.6.4 Editing a template", and for the text angling method, refer to "14.5.6.5 Changing a
text angle".
4.
To create an object on another position continuously, repeat steps 2 and 3.
14.10.6.2 Creating a text with EBL/VRM operation
1.
Click on the [EBL/VRM] button on the drawing toolbar.
The cursor changes to the EBL/VRM reference point cursor. (Refer to "14.2.5 Creating an
object in the EBL/VRM mode".)
2.
Click on the position of the reference point position of the EBL/VRM marker.
The EBL/VRM marker is displayed.
3.
Place the EBL/VRM marker on the position on which an object is to be created and
click the button.
An object is created on the position on which the button was clicked and the property
information is reflected in the object property dialog box. (Refer to "14.2.8 Object property
dialog box".)
4.
Adjust the parameters on the object property dialog box.
For the text input method, refer to "14.10.6.3 Editing a text", for the template usage method,
refer to "14.10.6.4 Editing a template", and for the text angling method, refer to "14.10.6.5
Changing a text angle".
5.
To create an object on another position continuously, repeat Steps 2 to 4.
Section 14 Creating a User Chart/ Updating a Chart Manually 14-106