JRC JMR-7230-S Instruction Manual page 656

To save a preferences
1
Click on the [Save] button.
The confirmation dialog box appears.
2
Enter a preferences name, and then click on the [OK] button.
The current preferences are saved.
A maximum of 64 characters can be entered for a file name. If all the file name characters do
not fit in the display area, the remaining file name characters will be displayed with an
abbreviation symbol (...).
To cancel saving, click on the [Cancel] button.
When saving is completed, an item is added to a blank line in the Preferences Name list.
To load preferences
1
Select the name of the preferences you want to load, and then click on the [Load]
button.
The confirmation dialog box appears.
2
Click on the [OK] button.
The selected preferences are loaded.
A maximum of 64 characters can be entered for a file name. If all the file name characters do
not fit in the display area, the remaining file name characters will be displayed with an
abbreviation symbol (...).
To cancel loading, click on the [Cancel] button.
Section 18 Setting up the Operation Mode 18-54