JRC JMR-7230-S Instruction Manual page 538

The descriptions of settings are shown in the table below.
Setting Item
Show ETA
Format
XTD Limit Line
Color
Show WPT Name
(Comment display)
WPT Name Font Size
(Comment font size)
Section 16 Setting up Screen View
Description of Setting
Selecting this enables to display the ETA
(estimated time of arrival at WPT) while
route monitoring.
When ETA is enabled, select a display
format of the ETA while route monitoring
by clicking on the corresponding button.
: UTC
: LMT
Selecting this enables to display XTD limit
lines.
When XTD Limit Line is enabled, select a
display color of XTD limit lines by clicking
on the corresponding button.
IALA-A: Starboard - green, Port - red
IALA-B: Starboard - red, Port - green
Selecting this enables to display a
comment on the vicinity of the target.
When Show WPT Name is enabled, select
a font size of comments by clicking on the
corresponding button (preview not
supported).
16-16
Setting Value
To enable: Select.
To disable: Clear.
UTC/LMT
To enable: Select.
To disable: Clear.
IALA-A, IALA-B
To enable: Select.
To disable: Clear.
Standard, Small