JRC JMR-7230-S Instruction Manual page 579

16.2.18 Setting up display of Own Ship Track Control,
display format of Own Ship/Cursor Position
and display of Sub-Information dialog
When you select [Control] in the classification pane, the [Control] dialog is displayed in the edit pane.
[RADAR Screen]
The descriptions of settings are shown in the table below.
Setting Item
Show Own Track
Control
Show Sub Information
Window (sub information
dialog box display)
[ECDIS Screen]
Description of Setting
Selecting this enables to display own track
control.
Note
This item takes effect only on the RADAR
screen.
Select this to enable to display the sub
information dialog box, and then select the
tab(s) you want to display.
Note
• The [Depth] tab can only be selected
when equipped with a water depth sensor.
• The [Current] tab can only be selected
when equipped with a GPS, a gyro and a
log sensor.
16-57
Setting Value
To enable: Select.
To disable: Clear.
To enable: Select.
To disable: Clear.
Tab selections
POSN DIFF(Difference
between POSN(Main) and
POSN(Sub)), Depth,
Current
Section 16 Setting up Screen View
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
付録