JRC JMR-7230-S Instruction Manual page 532

Setting Item
Interval (vector Select a vector time mark interval from the pull-down
time mark menu when Vector Time Mark is valid.
interval)
POS2 Symbol Selecting this enables to display the POS2 symbol.
Note
This item may not be displayed depending on the
equipment setting. The setting is not possible on the
RADAR screen.
Shortcuts
Click on any of available shortcuts to display the related dialog box.
Shortcut
Setting of AIS Filter
Settings of AZ
Settings of Anti-Grounding Look-ahead
Section 16 Setting up Screen View
Description of Setting
[AIS Filter Setting] dialog box
[AZ Setting] dialog box
[Anti-Grounding Look-ahead Setting] dialog box
16-10
Setting Value
1 to 6 min
To enable: Select.
To disable: Clear.
Setup Dialog