8.7
Registering and Displaying My Port
List
8.7.1
Registering to My Port List
You can register any position on the chart to the "My Port List" dialog box. After registration, you can
directly access to that position by selecting a port name from the My Port List.
1
Set the location to be registered.
S-57/C-MAP
Since the center position and the display scale of the screen that is currently displayed are
registered in the port name list, move the location to be registered to the center of the screen in
advance.
To display another position, shift the chart area (refer to "8.3 Moving the Chart") or zoom in
to/out from the chart. (Refer to "8.4 Zooming In/Out the Chart".
ARCS
Since the center position and the display scale of the screen that is currently displayed are
registered in the port name list, move the location to be registered to the center of the screen in
advance.
To display another position, display the chart according to the procedures provided below.
• 8.9.1 Selecting charts from all
• 8.9.2 Changing active panels (ARCS only)
2
Click on the [Menu] button on the left toolbar.
The menu is displayed.
3
Click [Chart] - [My Port List] on the menu.
The [My Port List] dialog box appears.
In the [My Port List] dialog, the Name, LAT (latitude), LON (longitude), and display Scale (scale)
of the port that is currently registered are displayed.
My port list
8-27
Section 8 Functions of the ECDIS (Option)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27