JRC JMR-7230-S Instruction Manual page 525

16.1 Setting Chart Display Mode (Multi
View Mode) (ECDIS only)
In the [View-Multi View Mode] dialog box, chart display modes can be set.
16.1.1 Setting Multi-Screen
For details about how to use the multi-screen, refer to "8.10.1 Display of multi view."
1
Click on the [Menu] button on the left toolbar.
The menu is displayed.
2
Click on [View] - [Multi View Mode] on the menu.
The [View-Multi View Mode] dialog box appears.
You can select a chart display mode from the following four modes.
• [Single View] Mode:
• [Top-Bottom] Mode:
• [Right-Left] Mode:
• [Picture in Picture] Mode: Displays the chart in View 2 on top of the chart in View 1 as a
1
Click on the icon of the chart display mode to be used.
A selection frame appears on the icon of the selected mode.
2
Click on the [Select Area from View1 for View2] button.
The button is highlighted.
3
On the chart in View 1, select an area you want to display in View 2.
The selected area is displayed in View 2.
Displays a chart in full screen.
Divides the screen into top and bottom sections; the same or
different charts can be displayed in two views of View 1 and
View 2.
Divides the screen into left and right sections; the same or
different charts can be displayed in two views of View 1 and
View 2.
child dialog box.
16-3 Section 16 Setting up Screen View
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
付録