Performing A Trial Maneuver - JRC JMR-7230-S Instruction Manual

6.13.2 Performing a trial maneuver

1
Click on the [Menu] button on the left toolbar.
The menu is displayed.
2
Click on [TT/AIS] - [Trial Maneuver] on the menu.
The [Trial Maneuver] dialog box appears.
3
Select the [Trial Function] checkbox.
The trial function is turned on.
When Trial Function is set to On, the character "T" blinks at the bottom of the own ship display
field in the radar display and means a trial maneuver.
4
Enter a setting value in each of the [Course] and [Speed] input boxes.
Memo
[Course] can be set up by turning the [EBL] dial and [Speed] by turning the [VRM] dial.
5
Set other characteristics.
[Vector Time]:
[Time to Maneuver]:
[Own Ship's Dynamic Trait]:
When this item is clicked, the dialog is displayed to set own ship's dynamic trait.
For the details, refer to "18.8 Setting own ship's dynamic trait".
For the settings of [Own Ship's Dynamic Trait], refer to "18.5.2 Setting own ship's dynamic trait".
The dangerous target symbol is displayed in red and the safe target symbol is displayed in
white.
The color of the safe target symbol can be changed with [Target Symbol] of [Settings] -
[General] - [Color and Brightness]. For the details, refer to "18.19 Setting Colors and
Brightness".
Time countdown display
Vector time (1 to 120 min)
Time until trial maneuvering is started (0 to 30 min)
6-77 Section 6 Target Tracking and AIS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27