JRC JMR-7230-S Instruction Manual page 534

The descriptions of settings are shown in the table below.
Setting Item
Past Track Selecting this enables to display the past
track.
Plot Color (plot When Past Track is enabled, select a
color of track) plot color of the track from the list
(preview not supported).
Track Period When Past Track is enabled, select a
track period from the list (preview not
supported).
Time Label Selecting this enables to display the time
label interval.
Interval (time label When Time Label is enabled, select a
interval) time label interval from the list (preview
not supported).
Past Position Selecting this enables to display the past
position.
Interval When Past Position is enabled, select an
(past position interval of track points from the list
interval) (preview not supported).
Current Vector Enable the current track display by
checking the item when Past Track is
enabled.
Current Size Set a vector length when Current Vector
is enabled.
Interval When Current Vector is enabled, select
the display interval.
Layer A/B/C/D/E When Current Vector is enabled, enable
the display of each of the layers, A, B, C,
D, and E by checking the item.
Color selection When Layer A/B/C/D/E/F is enabled,
combo box select the display color of each item.
Section 16 Setting up Screen View
Description of Setting
16-12
Setting Value
To enable: Select.
To disable: Clear.
White (Black), Gray, Pink, Magenta,
Blue, Cyan, Green, Yellow, Orange,
Dark Red
Note
When the background of the screen
is being set to Day1 or Day2, Black
can be selected instead of White.
1, 2, 4, 6, 8, 12, 16, 24 h
To enable: Select.
To disable: Clear.
1, 3, 5, 10, 30, 60,120 min
To enable: Select.
To disable: Clear.
0.5 min, 1 min, 2 min, 4 min, 0.1
NM, 0.2 NM, 0.5 NM, 1 NM
Enable: Check.
Disable: Uncheck.
0.1 ~ 99.9kn/cm
3sec, 5sec, 10sec, 30sec, 1min,
3min, 5min, 10min, 30min, 60min,
0.1NM, 0.2NM, 0.3NM, 0.5NM,
1NM, 3NM, 5NM, 10NM
Enable: Check.
Disable: Uncheck.
White, (Black), Gray, Amber,
Magenta, Blue, Cyan, Green,
Yellow, Orange, Dark Red