JRC JMR-7230-S Instruction Manual page 545

The descriptions of settings are shown in the table below.
Setting Item
AIS Symbol
Sleeping Class A, Class
B
Physical AtoN
Virtual AtoN
TT Symbol
TT Vector
GPS Buoy
Description of Setting
Selecting this enables to display the AIS
symbol.
Selecting this enables to display the
sleeping AIS of class A, ClassB.
Selecting this enables to display the
Physical AIS AtoN when the AIS Symbol is
selected.
Selecting this enables to display the Virtual
AIS AtoN when the AIS Symbol is selected.
Select this item to enable the TT symbol.
Select the TT Symbol to be used from the
combo box.
TT1 Symbol
TT2 Symbol
TT1 Symbol indicates the TT target
information that is received from RADAR1
and the TT Target ID is displayed as "T1-***"
(*** indicates the target number or ship
name).
TT2 Symbol indicates the TT target
information that is received from RADAR2
and the TT Target ID is displayed as "T2-***"
(*** indicates the target number or ship
name).
Note
This item is only enabled on the RADAR
screen.
Selecting this enables to display the TT
vector.
Note
This item takes effect only on the ECDIS
screen.
Selecting this enables to display the GPS
Buoy symbol.
16-23
Setting Value
To enable: Select.
To disable: Clear.
To enable: Select.
To disable: Clear.
To enable: Select.
To disable: Clear.
To enable: Select.
To disable: Clear.
To enable: Select.
To disable: Clear.
To enable: Select.
To disable: Clear.
To enable: Select.
To disable: Clear.
Section 16 Setting up Screen View
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
付録