2-17-2.Factory Default Setting; 2-17-3.Setting With Intelligent Tap - Omron F3SG-PGA-A User Manual

System Operation and Functions
 Detection capability
Detection capability for the F3SG-SR differs based on the number of floating beams as shown below.
Model
F3SG-SR-14
F3SG-SR-25
F3SG-SR-45
F3SG-SR-85
 LED indicator status
When the reduced resolution is enabled, the CFG indicator of the F3SG-SR receiver turns ON.
Refer to 2-1. Combination of Functions for more information on the use in conjunction with other functions.
2-17-2. Factory Default Setting
Reduced Resolution is disabled.
2-17-3. Setting with Intelligent Tap
The user cannot make any changes to the settings of this function by DIP Switch on the Intelligent Tap.
F3SG-SR/PG
120
User's Manual
Number of blocked
Detection capability
beams configured
- 14 mm
1 beam 24 mm
2 beams 34 mm
3 beams 44 mm
- 25 mm
1 beam 45 mm
2 beams 65 mm
3 beams 85 mm
- 45 mm
1 beam 85 mm
2 beams 125 mm
3 beams 165 mm
- 85 mm
1 beam 165 mm
2 beams 245 mm
3 beams 325 mm
Maximum diameter
Number of blocked
that does not turn off
beams to turn safety
the safety outputs in
outputs OFF
the detection zone
1 beam
2 beams
3 beams 16 mm
4 beams 26 mm
1 beam
2 beams 15 mm
3 beams 35 mm
4 beams
1 beam
2 beams 35 mm
3 beams 75 mm
4 beams 115 mm
1 beam
2 beams 75 mm
3 beams 155 mm
4 beams 235 mm
-
6 mm
-
55mm
-
-