Muting/Override - Omron F3SG-PGA-A User Manual

Setting with SD Manager 3

4-3-4-3. Muting/Override

F3SG-SRA
F3SG-SRB
First, carry out 4-3-1. Preparing to Change Settings.
Next, click the icon below on the Top page.
The setting screen below is displayed.
Function
No.
name
1 Muting
2 Muting mode
3 View
installation
4 Setting by
5 Zone setting
6 Confirm zone
F3SG-SR/PG
248
User's Manual

F3SG-PGA-A

F3SG-PGA-L
Description
Select Enable or Disable for the Muting function.
When you want to restore the readout settings
received from the F3SG-SR/PG, execute [Recover
status at readout].
Select a desired muting mode.
Shows installation conditions.
Select manual setting using SD Manger 3 or setting
by teach-in.
Select a desired zone number. To configure zone
settings, specify desired bottom and top beam
numbers from the drop-down list, or directly on the
chart. When you check the [Designate from chart]
box, you can specify a zone range by dragging red
lines shown on the chart. In both cases above,
execute [Confirm zone] to confirm the settings.
Confirm the settings of the zone.

F3SG-PGA-C

Configurable value or numerical
Initial value
Enable Disable/Enable
Standard Standard muting (Installation
Muting example 1)/Standard muting
(Installation example 2)/Exit-only
muting/Position detection muting
-
Manual Manual/Teach-in
Bottom/Top Desired beam
beam: (in 1-beam increments)
All beams
-

range
-
-