2-12-2.Factory Default Setting; 2-12-3.Setting With Intelligent Tap - Omron F3SG-PGA-A User Manual

System Operation and Functions
2-12-2. Factory Default Setting
It is configured to the inverted signal of the safety outputs.
Beam state
OSSD
AUX
2-12-3. Setting with Intelligent Tap
The user cannot make any changes to the settings of this function by the DIP Switch on the Intelligent
Tap.
When the Pre-Reset is enabled by the Dip Switch on the Intelligent Tap, the factory default setting is
inverted signal of the safety outputs.
Beam state
OSSD
AUX
F3SG-SR/PG
74
User's Manual
Unblocked
Blocked
Toff
ON
OFF
ON
OFF
Unblocked
Blocked
Toff
ON
OFF
100 ms max.
ON
OFF
Ton
Ton: OFF to ON response time
Toff: ON to OFF response time
Ton
100 ms max.
Ton: OFF to ON response time
Toff: ON to OFF response time