4-1-3-2. Connection Procedure When Using USB Connector
1.
Connect the USB connector with the Intelligent Tap as follows.
USB Type-C
2.
When you change the settings by using SD Manager 3, turn Positions 1 and 2 as shown below.
• Position 1: ON (Lock)
1
O
N
2
• Position 2: OFF (DIP Switch Disabled)
3
4
5
6
7
8
: Indicates the switch position.
3.
Connect the USB connector with the PC's USB terminal.
When the Intelligent Tap is powered up, the OUT indicator of the Intelligent Tap is illuminated in red or
green.
Intelligent tap
USB Type-C
4.
To restart the Intelligent Tap, unplug the USB connector from the Intelligent Tap and plug it again.
If the Intelligent Tap is connected with F3SG-SR/PG, turn ON the external power supply connected
with the Intelligent Tap again.
After the Intelligent Tap restarts and the power is turned ON, the OUT indicator of the Intelligent Tap is
illuminated in red or green.
[Not connecting F3SG-SR/PG]
USB Type-C
TM
TM
[Connecting F3SG-SR/PG]
Power
supply
TM
Setting with SD Manager 3
PC
Turn ON again
E
F3SG-SR/PG
205
User's Manual