S-311
5 . M A C H I N E D I S P O S A L
5.1. To ensure machine ecological disposal it is necessary to remove especially nonmetallic parts
from the machine. To take these parts out, it is necessary to perform the partial dismantling of
the machine, remove covers, dismantle the machine arm and remove the frame.
5.2. Aluminium and duralumin parts must be treated separately, also nonferrous metal parts and
plastic parts.
5.3. Parts mentioned in point 2 can be found in the spare parts manual with these marks:
1-72
F
- MACHINE MAINTENANCE
aluminium parts
non-ferrous metal parts
plastic and non-metallic parts
e-mail: service@amfreece.cz; parts@amfreece.cz; website: www.amfreece.com
Phones: +420 582 309 146 (Service); +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
Revised 02/2009