Cycle Mode - AMF S-100 Parts And Service Manual

S-311
12. C Y C L E M O D E
It is possible to set the type and the number of buttonholes which will be sewn in one sewing cycle.
C A U T I O N :
Modification AF - it is necessary to use the same cutting length for all buttonholes in one cycle. Imitation (no cut)
buttonholes of different length can be included in the sewing cycle.
Modification CT - to prevent the machine from damage, the length of buttonholes in one cycle must be the same
as the length of a cutting steel in the machine. To trim the lower threads, set the length of a buttonhole according
to the installed clamp feet - see section D3.
Return to main
display
Number of buttonholes
in CYCLE MODE
1-38
D
- MACHINE CONTROLS
e-mail: service@amfreece.cz; parts@amfreece.cz; website: www.amfreece.com
Phones: +420 582 309 146 (Service); +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
Button for CYCLE
MODE choice
(range 0 - 47 cycles)
Saving button

CYCLE MODE

Revised 04/2007