Machine Lubrication - AMF S-100 Parts And Service Manual

S-311
4 . M A C H I N E L U B R I C AT I O N
4.1. It is necessary to remove preserve oils and lubricate the places shown below before the
machine is switched on for the first time or after a long idle period. Use ESSO TERESSO 32 or
similar quality.
4.2. The amount of oil in the reservior
indicated by the red mark. Too much oil may
cause its overflowing from the base area.
4.3. The reservoir is filled by approximately
3
10 cm of oil through filling opening –.
4.4. The lubrication of the needle bar is performed
after unscrewing the screw ˜ and removing
the cover —. Few drops of oil drop on needle
bar above the bearing ™, on the centre of the
needle bar š to the area where the spiral
lubricating groove is and to the space between
the washers › and surface. Install the cover —.
1-70
F
- MACHINE MAINTENANCE
is
—
˜
e-mail: service@amfreece.cz; parts@amfreece.cz; website: www.amfreece.com
Phones: +420 582 309 146 (Service); +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
–
15
™
š
›
Revised 02/2009