The Buttonhole Shape Setting - AMF S-100 Parts And Service Manual

3 . T H E B U T T O N H O L E SHAPE S E T T I N G
To set the buttonhole, it is necessary to set the parameters of eye, the first and the second row of stitches
and the bar.
3.1 - setting the parameters of the eye
Return to main display
of buttonhole without eye
Number of stitches in
the eye
(range 4 - 20 stitches)
Eye start
correction
-Y axis
(range ± 2.0)
Revised 04/2007
e-mail: service@amfreece.cz; parts@amfreece.cz; website: www.amfreece.com
Phones: +420 582 309 146 (Service); +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
D
- MACHINE CONTROLS
- possible sizes of eye: 2,2x3,0; 2,8x4,2; 3,0x4,6; 3,2x5,0; 3,4x4,2;
No Eye or round eye by pressing surface A.
Bedplate feeding
Eye start
in the eye
correction
(range 0 - 100)
-X axis
(range ± 1.0)
Number of stitches in
the eye
(range 4 - 20 stitches)
Inner buttonhole diameter
(range 2.0 - 7.0 mm)
Inner buttonhole diameter
(range 2.0 - 3.5 mm)
Number of stitches in the
buttonhole (range 0 - 60 stitches)
Electronically adjustable
stitch bite (range ± 0.3 mm)
Return to main
display
Buttonhole
without eye
Eye start correction
-Y axis (range ± 1.0)
Return to main round
eye display
Bedplate feeding in the
eye (range 0 - 100)
S-311
Round eyelet
Feeding in the eye
(range 0 - 100)
Eye start correction
-X axis (range ± 1.0)
Number of sew stitches
on the buttonhole end
(range 0 - 9 stitches)
1-29