E
18. TH E TR I M M I N G ME C H A N I S M AD J U S T M E N T - LT T
The lower thread and gimp thread are trimmed before the clamp feet are raised.
1. Adjust so that looper thread and gimp are separated upward and downward by thread catching plate
2. The clamp fixing plate
clamp
and gimp clamp
3. Loosen the screw
the clamp plate edge
Tighten the screw
4. Using the stop screw
cylinder click
and the actuating arm
knife edge
is aligned with mark
Fasten the stop screw by nut
14
Revised 02/2009
e-mail: service@amfreece.cz; parts@amfreece.cz; website: www.amfreece.com
Phones: +420 582 309 146 (Service); +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
- STANDARD MACHINE ADJUSTMENT
ensures the correct holding of the upper and gimp thread by lower thread
.
and adjust the distance 55 mm between
and the bushing axis
.
adjust the maximal position of the
on the knife .
.
.
so that the fixing
12
13
14
55 mm
S-311
.
11
11
1-61