Display Information - AMF S-100 Parts And Service Manual

S-311
Caution: Program for S311 machine is universal it allows to sew different buttonhole shapes only by
changing the clamp plates. Please ensure that correct machine version (corresponding to clamp plate)
is selected on the software.
Be sure you understand the proper setting of the display: the eye shape, the sewing speed change, machine
modification change, the cutting space setting and cycle mode use.
Before setting the display parameters, read the following D section - machine controls in the manual.
2 . D I S P L AY I N F O R M AT I O N
Display messages
- standard - Ready; Busy
- error - error messages start with
letter E - see. Troubleshooting section
Thread
Catcher
Home position
Buttonhole end
adjustment
Sewing speed
adjustment
1-28
D
- MACHINE CONTROLS
Buttonhole counter
Moving to
First and
previous
second stitches
buttonhole in
row adjustment
cycle mode
e-mail: service@amfreece.cz; parts@amfreece.cz; website: www.amfreece.com
Phones: +420 582 309 146 (Service); +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
Butonhole
Button for
cutting
easy threading
settings
Illustration and
option of
buttonholes in
cycle mode
* 0
0,1 - 47 → functional cycle mode
Machine model and
additional accessories
option. Active only when
setting the code page 1-37
(- model change;
- trimming timing
change CT)
Service
mode
Number of
programmed
buttonhole
Eye
parameters
adjustment
Buttonhole lenght
without end
Moving to the
*
following
Number
buttonhole in
of cycle mode
cycle mode
→ non-functional cycle mode
Revised 04/2007