1. In the left menu, click
2. To enable the quality of service feature, click the
3. In the three remaining fields, select the appropriate COS (priority) level. Options are COS7 - COS0. The default settings work
for most systems.
4. Click
APPLY
to save your settings.
Advanced
On this page, you can configure a the WAN MTU setting.
1. In the left menu, click
2. Select the MTU (Maximum Transmission Unit) size for your network. Options are 0 - 2048. The default is 1500.
3. Click
APPLY
to save your changes.
Connected Devices
On this page, you can view the devices connected to your LAN.
Note: Before you can assign a device to a group, you must configure an access schedule, then configure a device group, and finally
assign the schedule to the group.
SmartRG Inc., an ADTRAN Compny Proprietary and Confidential. All Right Reserved. © 2019
Network
>
Ethernet WAN
>
Downstream
white circle
Network > Routing > Firewall
QoS. The following page appears.
to the right of Enabled.
> Advanced. The following page appears.
50