B
External Connections
A Waters Technical Service representative unpacks and installs your
ACQUITY UPLC I-Class system modules.
See also:
(P/N 715003144)
Requirements:
•
Contact Waters Technical Service before moving the ACQUITY
UPLC I-Class system modules.
•
If you must transport a system component, or remove it from
service, contact Waters Technical Service for recommended
cleaning, flushing, and packaging procedures.
Warning:
modules without assistance.
Contents:
Topic
System tubing connections
External wiring connections
Signal connections
Connecting to the electricity source
System tubing connections
The system's external tubing connections for solvent flow and drainage are
shown below.
Configuring ACQUITY UPLC I-Class System Components
To avoid back injuries, do not attempt to lift the system
System tubing connections
Page
B-1
B-4
B-5
B-11
B-1