Spot Light; Wiper; Front Wiper And Washer Switch; Rear Wiper And Washer Switch - Kubota M7132 Operator's Manual

CAB OPERATION
IMPORTANT :
• The battery will discharge if the dome light
remains on. Be sure to check the dome light
switch position and/or door closure.

SPOT LIGHT

The spotlight is directed on the armrest and right hand
console.
(1) Spotlight
(2) Switch

WIPER

1. Front wiper and washer switch

1. Turn on the key switch and turn the front wiper and
washer switch clockwise or anticlockwise to activate
the wiper.
2. When the front wiper and washer switch is pressed,
washer liquid jets out.
(1) Front wiper and washer
switch
IMPORTANT :
• Do not activate the wipers when the
windows are dry, as they may be scratched.
240
(A) "ON"
(B) "OFF"
(A) "OFF"
(B) "INTERMITTENT"
(C) "CONTINUOUS"
(D) "PUSH"
Be sure to jet washer liquid first and then
activate the wipers.

2. Rear wiper and washer switch

1. Turn on the key switch and press the bottom half of
the wiper switch to the first stage, activating the
wiper.
2. When the switch is pressed down to the second
stage, washer liquid jets out.
The jetting continues while the switch is pressed
and the wiper is activated continuously.
(1) Rear wiper and washer
switch
IMPORTANT :
• Do not activate the wipers when the
windows are dry, as they may be scratched.
Be sure to jet washer liquid first and then
activate the wipers.

3. Using the wipers in cold season

1. While not used in cold season, keep the wiper
blades off the windscreen to prevent them from
being frozen to the windscreen.
2. If the windscreen is covered with snow, scrape it off
the windscreen before using the wipers.
3. If the wiper blades are frozen to the windscreen and
fail to move, be sure to turn the main key switch to
"OFF" and remove the ice from the blades. Then
place the main key switch back to "ON".
4. When commercially available cold-season wiper
blades are used, make sure their size is the same
as or smaller than that of the standard ones.
IMPORTANT :
• In the cold season, the wiper blades and the
wiper motor may become overloaded, and
cause damage. To avoid this, be sure to take
the above precautions.
SPOT LIGHT
(A) "WIPER"
(B) "WIPER and WASHER"
M7132, M7152, M7172