Differential Lock Indicator; Power Shift Transmission Control - Kubota M7132 Operator's Manual

OPERATING THE TRACTOR

(1) Differential lock indicator

(2) AUTO differential lock indicator
(3) Differential lock switch
(4) AUTO differential lock switch
9.3 Differential lock indicator
When the AUTO differential lock or manual differential
lock mode is selected, the indicator on the instrument
panel lights up.
(1) Differential lock indicator
IMPORTANT :
• When using the differential lock, always slow
the engine down.
• To prevent damage to the power train, do not
engage the differential lock when one wheel is
spinning and the other is completely stopped.
• If the differential lock cannot be released, step
lightly on the brake pedals alternately.
162
POWER SHIFT TRANSMISSION
CONTROL
This machine is equipped
transmission for 30-speed change in forward and 15-
speed change in reverse motion.
WARNING
To avoid personal injury or death:
• The ez-command
position. To bring the tractor to a complete
stop, step on the brake pedal or set the shuttle
lever to neutral.
With the optional creep device in place, the travelling
speed can be changed by up to 54th in forward and
27th in reverse stages. Further, in road and field
modes, the "auto shift" mode as well as the "manual"
mode may be selected.
In the auto shift mode, the optimum travelling speed
can be automatically selected by electronic control
within the operator-preset speed range. Thanks to this
mode, no troublesome gear shifting is required any
longer, allowing the operator to concentrate on his or
her job.
The gear shift sensitivity in response to the engine load
and other settings may also be flexibly made. With this,
PTO-driven and towed implements are operated with
high accuracy in an eco-friendly way.
In the maximum travelling speed range, the overdrive
mechanism works for the engine to run at medium rpm
but for the machine to travel at maximum speed. In
short, this helps to run the machine economically.
Standard model
(1) Ez-command centre
(2) Shuttle enable button
(3) Range gear shift button
(4) Auto shift button
TRAVEL CONTROLS
with an electronic
centre has no neutral
(5) Shuttle neutral button
(6) Transmission mode select
switch
(7) Auto shift sensitivity dial
M7132, M7152, M7172