Shuttle Neutral Button; Creep Speed (If Equipped) - Kubota M7132 Operator's Manual

OPERATING THE TRACTOR
Standard model
(1) Shuttle button
(2) Shuttle enable button
Premium, Premium KVT model
(1) Shuttle button
(2) Shuttle enable button
NOTE :
• Either the shuttle lever or the shuttle button,
whichever is activated later, is given priority.
If the tractor is moving forward with the forward
shuttle button and the shuttle lever is moved to
reverse, for example, the tractor switches to
reverse.

6. Shuttle neutral button

Press this button to return the transmission to the
neutral position.
158
(F) "FORWARD"
(R) "REVERSE"
(F) "FORWARD"
(R) "REVERSE"
Standard model
(1) Shuttle neutral button
Premium, Premium KVT model
(1) Shuttle neutral button
NOTE :
• Even when the shuttle lever is shifted to the
forward or reverse position, pressing the button
puts the transmission to the "neutral" position.

7. Creep speed (if equipped)

WARNING
To avoid personal injury or death:
• When you leave the tractor, be sure to apply the
parking brake and stop the engine.
• In applying the brakes:
– The torque of the wheel axle is extremely
high while creep speed is being used. Be
sure to step down on the clutch pedal
completely before applying the brakes, or
the torque will overcome the brakes.
– When starting to operate the tractor, be sure
to release the parking brake.
Misuse of the brakes may cause damage to
the transmission and is therefore not
acceptable to KUBOTA for coverage under
the warranty.
TRAVEL CONTROLS
M7132, M7152, M7172