Adjusting The High-Hitch Level; High-Hitch With Automatic Trailer Coupling - Kubota M7132 Operator's Manual

TYPE A (HITCH MADE BY SCHARMÜLLER)

2.1 Adjusting the high-hitch level

1. Turn the handle upward to unlock them. Move the
high-hitch bracket up and down to change the hitch
height.
2. Align the lock pin with the lock hole. Return the
handle horizontal to lock them.
(1) High-hitch
(2) Handle
(3) Lock pin
(4) Lock hole
2.2 High-hitch with automatic trailer
coupling
COUPLING UP
1. Lift the operating handle upwards as far as it will go
until it blocks.
The coupling pin is raised and the trigger lever is
visible.
(1) Operating handle
(2) Coupling pin
(3) Trigger lever
(4) Security pin
2. Slowly reverse the tractor: the drawbar eye on the
trailer must fully penetrate into the hitch assembly
until the trigger lever is released, whereupon the
shunt force produced will cause the immediate
insertion of the coupling pin as well as the
automatic retraction of the security pin.
M7132, M7152, M7172
(A) "UNLOCK"
(B) "LOCK"
3-POINT HITCH AND DRAWBAR
(1) Drawbar eye
(2) Hitch assembly
(3) Operating handle
(4) Coupling pin
(5) Trigger lever
(6) Security pin
UNCOUPLING
1. Lift the operating handle until it locks into position.
2. Travel forward the tractor until the drawbar eye is
disengaged.
(1) Operating handle
3. For safety reasons, it is hereby recommended that
the drawbar coupling is kept locked at all times.
To lock the drawbar coupling, act on the lock handle
rotating it in the direction of the arrow, as illustrated.
(1) Lock handle
207