Setting The Speeds (Standard Model); Setting The Speeds (Premium And Premium Kvt Models); Cancelling The Setting (All Models) - Kubota M7132 Operator's Manual

ENGINE OPERATION
• Keep the hand throttle above the minimum speed.
At the minimum speed, a memory set-up cannot be
performed.
• You can also depress the foot throttle to increase
the engine speed above the set speed.

4.1 Setting the speeds (Standard model)

Setting 1 (with the engine running)
1. First make sure that the indicators of the engine
rpm memory buttons (A) and (B) are both off.
2. Using the hand throttle, increase the engine rpm to
the desired preset level.
3. Hold down the engine rpm memory button (A), and
the current rpm level is memorized in the engine
rpm memory button (A) as memory rpm take the
same procedure for the engine rpm memory button
(B).
Setting 2
1. Before making the engine rpm memory setting with
the engine off, get the memory rpm levels (A) and
(B) displayed in the LCD on the instrument panel
and check the levels to readjust.
(See Basic information monitor and performance
monitor on page 66.)
2. Make sure that the indicators of the engine rpm
memory buttons (A) and (B) are both off. Then set
the hand throttle above the minimum speed.
3. Press the engine rpm memory button (A) (its
indicator lights up).
4. While checking the memory rpm displayed in the
LCD, set a desired rpm with the engine rpm
memory adjustment button (up) or (down). Every
time the relevant button is touched, the speed
changes in 10-rpm increments or decrements. Hold
down the button, and the speed continuously
changes.
Use the same procedure for the engine rpm
memory button (B).
(1) Engine rpm memory button (A)
(2) Engine rpm memory button (B)
(3) Engine rpm memory adjustment button (up)
(4) Engine rpm memory adjustment button (down)
M7132, M7152, M7172
4.2 Setting the speeds (Premium and
Premium KVT models)
Two different engine rpm levels can be present on the
K-monitor screen.
Details regarding the engine transmission settings can
be found in a different section.
™
(See INTELLIPANEL CONTROL on page 59.)
(1) Engine rpm memory (A/B) indicator
(2) Engine rpm
(3) Engine rpm memory (A) control
(4) Engine rpm memory (B) control
(5) Minus (-) switch
(6) Plus (+) switch
(7) Engine rpm memory (A) switch
(8) Engine rpm memory (B) switch
NOTE :
• The set speeds will be stored even after the
engine is stopped.

4.3 Cancelling the setting (all models)

Any of the following actions will cancel the rpm dual
memory settings.
1. For the switch (A) side, when the memory speed is
engaged, press the switch (A) again to cancel.
For the switch (B) side, when the memory speed is
engaged, press the switch (B) again to cancel.
2. When the memory speed is cancelled, the speed
will return to the speed that is determined by the
hand throttle (foot throttle).
3. Return the hand throttle to the lowest speed
position.
OPERATING THE ENGINE
141