Kubota M7132 Operator's Manual page 92

™
INTELLIPANEL CONTROL K-MONITOR MAIN MENU (PREMIUM AND PREMIUM KVT MODEL ONLY)
If a "lowering" action is made with the depth control dial or the 3-point quick lower switch in the automatic draft control
mode, the indicator (4) lights up and stays on.
Adjusting the draft sensitivity control (13)
Extend the graph farther to the right (raise the percentage) to increase the draft sensitivity. Depending on the type of
job, readjust the draft sensitivity.
If the draft sensitivity is set at 0%, the position control works instead.
Setting the ride control
Touch the left half of the ride control switch (7), and the ride control gets activated. A touch on the right half
deactivates it.
The ride control unit serves to absorb vibrations and shocks upon the tractor, when the machine is moved equipped
with a 3-point-hitched implement.
The ride control unit activates itself if the 3-point quick raise switch is pressed to bring the rear hitch up to its top limit
and the travelling speed rises above 6 km/h (3.7 mph).
Setting the wheel slip control (9)
Used together with the optional radar device, the tractor can be constantly kept under the best control. This helps to
improve your productivity.
For details, contact your local KUBOTA Dealer.
3-Point hitch status indicator (2)
The control status of the 3-point hitch is displayed all the time with the following indicators:
(1) Blocked (neutral)
(2) Float
(3) Transport
(4) Work
86
M7132, M7152, M7172