Kubota M7132 Operator's Manual page 34

SAFE OPERATION
CARE OF PICTORIAL SAFETY LABELS
• Keep pictorial safety labels clean and free from obstructing material.
• Clean pictorial safety labels with soap and water, dry with a soft cloth.
• Replace damaged or missing pictorial safety labels with new labels from your local KUBOTA Dealer.
• If a component with pictorial safety label(s) affixed is replaced with new part, make sure new label(s) is (are)
attached in the same location(s) as the replaced component.
• Mount new pictorial safety labels by applying on a clean dry surface and pressing any bubbles to outside edge.
28
M7132, M7152, M7172