Setting The Range Gear Shift In The Field Mode (Premium Model); Operating In The Manual Mode - Kubota M7132 Operator's Manual

POWER SHIFT TRANSMISSION CONTROL
2. The automatic gear shifting will be within the preset
main gear shift range.
Details regarding relevant settings can be found in
a different section.
(See Setting the
transmission (Premium model only) on page 93.)
(1) Selected travelling speed
gear shift
(2) Previous screen resume
switch
(3) Low-speed setting switch
(4) High-speed setting switch
NOTE :
• The automatic gear shift range in the field
mode may be preset only for the main gear
shift.
• Suppose that while the machine is running,
the travelling
decreased out of its preset range with the
ez-command center. When this happens, the
manual mode is resumed. To go back to the
auto shift mode, get the travelling speed
back into the preset range and press the
auto shift button again.
3.6 Setting the range gear shift in the field
mode (Premium model)
1. The range gear shift consists of 5 speeds.
Determine the range gear shift range that is best
suited for the working speed.
2. Hold down the range gear shift button and push the
ez-command centre forward, and the range gear
shift goes up. Pull this lever backward, and this shift
comes down.
Before setting the range gear shift in the field mode,
bring the tractor to a complete stop.
The selected range gear shift stage can be checked
with the LCD indicator on the instrument panel.
M7132, M7152, M7172
engine and power
(5) High-speed slider
(6) Low-speed slider
(7) Main gear shift section (1 to
6)
speed is increased
shift
(1) Ez-command centre
(2) Range gear shift button

4. Operating in the manual mode

To operate the machine in the manual mode, it is
necessary to switch from the auto shift mode to the
manual mode.
1. Hold down the auto shift button to select the
"manual" mode.
or
OPERATING THE TRACTOR
(X) "Shift up"
(Y) "Shift down"
167