Setting The Pto - Kubota M7132 Operator's Manual

™
INTELLIPANEL CONTROL

8. Setting the PTO

Automatic ON/OFF setting of PTO shaft revolutions, which is interlocked with the lifting height of the rear 3-point-
hitched implement, can be made.
WARNING
To avoid personal injury or death:
• Use caution when setting auto engagement, considering the type of implement in use.
(1) Front PTO indicator
(2) Front PTO rpm
(3) Rear PTO indicator
(4) Rear PTO rpm
(5) Height at which the PTO turns on when the
implement is lowered
Setting the 3-point-hitch-interlocked PTO function
1. Start the engine and start PTO rotation.
2. Touch the left half of the auto PTO switch (6), and the 3-point-hitch-interlocked PTO function is enabled. A touch
on the right half disables this function.
While the 3-point-hitch-interlocked PTO function is on, the indicator (11) lights up and stays on.
Setting the height at which the PTO restarts turning when the implement is lowered
1. Touch the "Plus (+)" switch (7) or "Minus (-)" switch (8) on the right side to readjust the height at which the PTO
shaft restarts turning.
Raise the percentage to raise the height at which turning restarts.
Setting the height at which the PTO stops turning when the implement is raised
1. Touch the "Plus (+)" switch (7) or "Minus (-)" switch (8) on the left bottom to readjust the height for the PTO shaft
to stop turning.
Lower the percentage to lower the height at which turning stops.
Displaying the PTO rpm
1. With the PTO switch at ON (engage), the front PTO rpm (2) as well as the rear PTO rpm (4) are displayed.
92
K-MONITOR MAIN MENU (PREMIUM AND PREMIUM KVT MODEL ONLY)
(6) Auto PTO switch
(7) Plus (+) switch
(8) Minus (-) switch
(9) Height at which the PTO turns on when the
implement is raised
(10) Current lift arm height
(11) Auto PTO indicator
M7132, M7152, M7172