Pre-Operation Check; Daily Check; Service Inspect Indicator; Checking The Items Reaching The Maintenance Interval - Kubota M7132 Operator's Manual

DAILY CHECK

PRE-OPERATION CHECK

DAILY CHECK
To prevent trouble from occurring, it is important to
know the condition of the tractor. Check it before
starting.
WARNING
To avoid personal injury or death:
• Make sure to check and service the tractor on a
level surface with the engine shut off, the
parking brake "ON" and the implement lowered
to the ground.
Check item
• Walk around inspection
• Check engine oil level
• Check transmission oil level
• Check coolant level
• Check water separator
• Clean grill, radiator and cooler
• Check DPF/SCR muffler
• Check brake pedal
• Check parking/secondary brake lever
• Check pneumatic brake pressure (if equipped)
• Check indicators, gauges and meter
• Check lights
• Check seat belt
• Check movable parts
®
• Supply DEF/AdBlue
• Check anti-frost heater for oil separator (if
equipped)
• Refuel
(See DAILY CHECK on page 255.)
• Care of pictorial safety labels
(See PICTORIAL SAFETY LABELS on page 21.)

SERVICE INSPECT INDICATOR

By monitoring the LCD unit on the instrument panel, the
10 maintenance items communicating with the tractor's
hour meter can be kept under accurate control.
(See Checking the items reaching the maintenance
interval on page 119.)
When engine oil, the most significant of all these,
reaches its replacement time, the service inspect
indicator will automatically appear on the LCD.
M7132, M7152, M7172
(1) Service inspect indicator (wrench mark)
After replacing the oil, the indicator will disappear when
you perform reset, but will appear when again reaching
the relevant time.
Confirm the other maintenance items with the
procedure below before operation as well. For this
reason, act quickly
maintenance times are reached.
1. Checking the items reaching the
maintenance interval
1. Press the [SET UP/00] switch on the instrument
panel, and the setting mode screen appears.
PRE-OPERATION CHECK
when replacement and
119