Front 3-Point Hitch (If Equipped); Lift Control - Kubota M7132 Operator's Manual

3-POINT HITCH AND DRAWBAR
(1) Towing hook
(2) Drawbar
(3) Pivot pin
FRONT 3-POINT HITCH (IF
EQUIPPED)
WARNING
To avoid personal injury or death:
• It is very dangerous to run the machine at high
speed with a front 3-point hitch implement
attached.
It is strongly recommended to run the machine
at a low speed permitting full attention to
operation.
• When travelling on public roads, take anti-drop
measures for front-mounted implements.
• Do not attach any implement that may block the
operator's front vision or the headlight beam.
The hydraulic lifting unit of the front 3-point hitch can be
switched for single-acting cylinder or double-acting
cylinder. It enables a wide variety of work.
When an implement is attached at the tractor front and
another one at the tractor back, the working efficiency
can be dramatically improved.
210

FRONT 3-POINT HITCH (IF EQUIPPED)

(1) Lift cylinder
(2) Lower link
(3) Top link
(4) PTO
(5) Hydraulic selector valve

1. Lift control

The front 3-point hitch cylinder is connected with the
remote control valve.
1. Pull the remote control valve lever or switch toward
yourself, and the lower link is raised. Push it away
from yourself, and the link is lowered.
2. Release your hand from the lever or switch, and the
lower link returns to its neutral position.
3. When you push the lever or switch further from the
lower position, the lower link is fixed at the float
position. The implement will be able to follow the
terrain.
(1) Front 3-point hitch control
lever
(A) "RAISE"
(B) "LOWER"
(C) "NEUTRAL"
(D) "FLOAT"
M7132, M7152, M7172