Light Switch (With Repeat Headlight Type) - Kubota M7132 Operator's Manual

LIGHT CONTROLS
(1) Switch (3 positions)
All lights off
Position light on
Headlight and position light on
Headlight beam selection lever
The headlight switches between low and high beam
each time you move the lever to the (B) position. When
the headlight is on low beam, it will flash when the lever
is moved to the (A) position.
(1) Headlight beam selection
lever
NOTE :
• High beam indicator will be on when selection
lever is in "high beam" position.
• To prompt the operator to turn off the lights, the
buzzer starts sounding if the key is turned to off
position with lights on.
1.2 Light switch (with repeat headlight
type)
1. Turn the key to the "ON" position.
2. In accordance with combinations of the switches 1
and 2, the lights in the following table light up.
M7132, M7152, M7172
(A) "PUSH"
Switch position
(a) position
(b) position
(c) position
(A) "Flash" (on low beam)
(B) "Low or high beam switch"
(1) Switch 1 (3 positions)
(2) Switch 2 (2 positions)
All lights off
Position light on
Headlight and position light on
Repeat headlight and position
light on
Headlight beam selection lever
The headlight switches between low and high beam
each time you move the lever to the (B) position. When
the headlight is on low beam, it will flash when the lever
is moved to the (A) position.
(1) Headlight beam selection
lever
NOTE :
• High beam indicator will be on when selection
lever is in "high beam" position.
• To prompt the operator to turn off the lights, the
buzzer starts sounding if the key is turned to off
position with lights on.
OPERATING THE TRACTOR
(A) "PUSH"
Switch position
Switch 1 Switch 2
(a) position ---
(b) position ---
(c) position (d) position
(c) position (e) position
(A) "Flash" (on low beam)
(B) "Low or high beam switch"
149