Example Of Operation On Combined Auto Shift And Manual Mode; Setting The Auto Shift Sensitivity - Kubota M7132 Operator's Manual

POWER SHIFT TRANSMISSION CONTROL
3. Pull it backward stage by stage, the range travelling
speed shifts down one by one.
The selected range gear shift stage can be checked
with the LCD indicator on the instrument panel.
NOTE :
• To start the tractor at a specific speed,
determine the range gear shift and main
gear shift settings and use the clutch pedal
or the shuttle lever.
• In doing a light-duty job in the road mode,
the range gear shifting can be made without
having to stop the tractor. As well, you can
switch the range gear shift without pressing
the range gear shift button.
(1) Ez-command centre
(2) Range gear shift button
5. Example of operation on
combined auto shift and manual
mode
Starting the auto-shift-mode run
1. Set the travelling speed range (9th through 12th, for
example) according to the type of work. Then start
the tractor.
2. The automatic operation will go on in response to
the load within this preset travelling speed range.
Switching to the manual mode run
1. After pressing the auto shift button to switch to
manual mode, shift gears according to work
conditions and carry out operation.
If you use the ez-command centre to shift up or
down beyond the gear range set in auto shift mode,
the mode will switch to manual.
Returning to the auto shift mode run
1. If the current travelling speed range in the manual
mode is within the auto shift mode preset travelling
speed range (9th through 12th), press the auto shift
button, and the auto shift mode is resumed.
M7132, M7152, M7172
(A) "PUSH"
(X) "Shift up"
(Y) "Shift down"
2. If the travelling speed is out of its preset range, first
return it to its preset range. Then press the auto
shift button.
(A) "Auto shift mode"
(B) "Switching to the manual mode"
(C) "Auto shift mode"

6. Setting the auto shift sensitivity

The auto shift sensitivity can maintain the engine rpm
for the gear shifting up/down.
When the sensitivity is set at a lower position, the gear
shifting is maintained by lower engine rpm, and when
set at a higher position, the gear shifting is maintained
by higher engine rpm.
When running in the auto shift mode
Refer to the following table for settings according to the
job.
• Eco-friendly operation
The gear is automatically shifted up/down in lower
engine rpm.
• Power required operation
The gear is automatically shifted up/down in higher
engine rpm.
OPERATING THE TRACTOR
169