Table of Contents
Advertisement
OPERATING THE TRACTOR
Firmness adjustment
The seat suspension can be adjusted as follows:
Turn the firmness adjustment knob to the (E) position
for the firmer ride or (F) position for the softer ride.
Lumbar support adjustment
Turn the lumbar support adjust knob to the desired
position.
Tilt adjustment
Pull the backrest tilt adjust lever and tilt the backrest to
the desired position.
Backrest extension
Pull the backrest extension to the desired height.
Arm rest
Armrest may be set at upright position if desired.
Arm rest height adjustment
Turn the adjustment knob to the desired height of the
armrests.
RH arm rest (Premium, Premium KVT models only)
The right arm rest height is adjustable. To reposition the
arm rest height, unlock the lock handle and slide the
arm rest upward or downward, and securely lock it by
hand so that you can operate the levers and switches
comfortably.
In this case, please attach the lock handle to the
position of (2) when moving the armrest to higher limit,
and position of (3) when moving the armrest to lower
limit.
(1) RH arm rest
(2) Lock handle (High mount po-
sition)
(3) Lock handle (Low mount po-
sition)
Swivel adjustment
Unlock the swivel adjust lever and rotate the seat right
or left as desired.
NOTE :
Using the swivel seat:
132
(A) "HIGH"
(B) "LOW"
(C) "LOCK POSITION"
(D) "UNLOCK POSITION"
OPERATOR'S POSITION CONTROLS
• Swivel the seat to the right and left to position
yourself comfortably for jobs in which you need
to look rearwards.
• Turn the seat to the left to facilitate getting in
and out of the tractor.
• The seat can swivel in both directions.
(1) Swivel adjust lever
2. Operator presence control (OPC)
system
The tractor is equipped with a system which stops the
PTO and activates a warning buzzer.
This system functions according to the conditions
below.
When the tractor is stopped:
• Even if the PTO clutch control switch is engaged,
the PTO will not start if the operator is standing up
from the operator's seat.
• If the key switch is at "ON" position (engine running
or not) and the parking brake is not applied,
standing up from the operator's seat will set off the
warning buzzer.
• If shuttle is not "NEUTRAL" and the parking brake
is applied, standing up from the operator's seat will
set off the warning buzzer and shuttle changes to
"NEUTRAL" (Premium KVT model only).
• If the tractor is not traveling with the PTO running,
standing up from the operator's seat will stop the
PTO and sound the warning buzzer for 1 second.
When the tractor is moving:
• Standing up from the operator's seat will set off the
warning buzzer and the PTO will continue rotating.
3. Seat belt
WARNING
To avoid personal injury or death:
• Always use the seat belt when a ROPS or CAB
is installed.
M7-132,M7-152,M7-172
Advertisement
Table of Contents
