Front Pto Operation (If Equipped); Pto Clutch Control Switch; Pto Clutch Indicator - Kubota M7132 Operator's Manual

PTO
FRONT PTO OPERATION (IF
EQUIPPED)
The front PTO and rear PTO are independent, and both
PTOs can be operated together or individually.
WARNING
To avoid personal injury or death:
• Disengage PTO, stop engine, and allow all
rotating components to come to a complete
stop before connecting,
adjusting, or cleaning
equipment.
• When the front PTO is not used, keep it off.
Direction of turning PTO
PTO/engine speed
PTO shaft

1. PTO clutch control switch

The PTO clutch control switch engages or disengages
the PTO clutch which gives the PTO independent
control.
1. Pull up the switch knob and tilt it forward, and the
PTO clutch comes "ON" (engage).
2. Tilt the switch knob backward, and the PTO clutch
comes "OFF" (disengage).
(1) Front PTO clutch control
switch
198
disconnecting,
any PTO driven
Anti-clockwise, viewed from
tractor front
1000/2000 rpm
6 splines
(A) "ON"
(B) "OFF"

FRONT PTO OPERATION (IF EQUIPPED)

(1) Front PTO clutch control
switch
IMPORTANT :
• To avoid shock loads to the PTO, reduce engine
speed when engaging the PTO, then open the
throttle to the recommended speed.
NOTE :
• If the tractor is travelling with the PTO running,
standing up from the operator's seat will set off
the warning buzzer (the PTO will continue
rotating).
• If the tractor is stopped with the PTO running,
standing up from the operator's seat will stop
the PTO after 1 second (the warning buzzer will
not sound).
If the parking brake is applied, the PTO will
continue rotating.
• The PTO clutch can be engaged when the
operator is seated in the operator's seat.
Otherwise, the clutch cannot be engaged.

1.1 PTO clutch indicator

The PTO clutch indicator turns on while PTO clutch
control switch is in "ON" (engage) position.
(1) PTO clutch indicator
(A) "ON"
(B) "OFF"
M7132, M7152, M7172