Table of Contents
Advertisement
GE M
S
EDICAL
YSTEMS
D
FC091194, R
IRECTION
4-3-13
Probe/Connectors Check
NOTE:
Probes can be connected at any time, whether the unit is ON or OFF
Take the following precautions with the probe cables:
CAUTION
- Keep away from the wheels
- Do not bend
- Do not cross cables between probes
Table 4-31
Step
1.
2.
3.
4.
5.
6.
7.
8.
4 - 50
02
EVISION
Probe and Connectors Checks
Task
PROBE
Press
on the Control Panel.
If not already selected. use the trackball to select the
desired probe.
Trackball to the desired application
Press SELECT to launch the application.
To change application without changing the current
probe, press APPL. on the Control Panel.
Verify no missing channels
Verify there's no EMI/RFI or artifacts specific to the
probe.
Test the probe in each active connector slot.
"Probe Connection" on page 3-13.
Do a leakage test on the probe,
Tests" on page 10-10.
Repeat this procedure for all available probes.
Section 4-3 - Functional Checks
A list of the connected probes will pop up on the screen.
An application menu for the desired probe is listed on
the screen.
The selected application starts.
All channels is functioning.
No EMI/RFI or artifacts.
See
It will display pictorial data each time
See "Electrical Safety
It passes the test.
V
7 / V
7 PRO S
IVID
IVID
ERVICE
Expected Result(s)
M
ANUAL
Advertisement
Table of Contents
