GE Vivid 7 Service Manual page 432

GE M S
EDICAL YSTEMS
D FC091194, R
IRECTION
8-4-7 Front Bumper Replacement Procedure
8-4-7-1 Manpower
One person, 30 minutes
8-4-7-2 Tools
• Phillips size 2
• Torx screwdriver T-20
8-4-7-3 Preparations
1.) Shut down the system as described in
2.) Remove Front Cover as described in
8-4-7-4 Front Bumper Removal Procedure
1.) Unscrew 4 Torx screws under the bumper.
2.) Lift the bumper off.
8-4-7-5 Front Bumper Installation Procedure
1.) Put the new bumper in position.
2.) Fasten the 4 screws.
NOTE: Gentle. Don't use power.
3.) Install Front Cover as described in
8 - 50
02
EVISION
Screw holes
Figure 8-44 System front and Front Bumper
Section 8-4 - FRU Replacement Procedures
"Power Shut Down" on page
"Front Cover Removal Procedure" on page
"Front Cover Installation Procedure" on page
V 7 / V 7 PRO S
IVID IVID ERVICE
4-5.
8-5.
8-5.
Front Bumper
M
ANUAL