Power Shut Down; Switching Off The Unit - GE Vivid 7 Service Manual

GE M S
EDICAL YSTEMS
D FC091194, R
IRECTION
3-7-11

Power Shut Down

3-7-12

Switching OFF the Unit

See "Power Shut Down" on page 4-5
1.) Press the ON/OFF button on the top left of the Control Panel to display the Exit dialog window.
2.) Select SHUTDOWN.
To completely switch off the unit before disconnecting the Mains Power Cable, follow the additional
steps below:
3.) Set the Circuit Breaker (on rear of unit) to OFF.
4.) Remove the plug from the mains power outlet.
3-7-12-1 Overview
When the unit is switched off, the system performs an automatic shutdown sequence. The unit can be
switched off into two states:
• Standby Mode:
Most of the system is powered down, but a certain portion of the unit remains energized. The
standby mode allows a shorter reboot time when the system is used on a daily basis or moved from
one place to another.
• Full Shut Down:
The entire system is shut down. It is recommended to perform a full shutdown at least once a week.
3-7-12-2 Power Shut Down to Standby Mode
This procedure describes the needed steps to power down the unit to Standby mode:
1.) Press the ON/OFF key on the Control Panel once to display the System - Exit menu on the screen.
.
Figure 3-11 Press ON-OFF key once
02
EVISION
The shutdown process takes a few seconds and is completed when the Control Panel
illumination is turned off.
Press this key.
Chapter 3 - Installation
for a detailed description.
V 7 / V 7 PRO S
IVID IVID ERVICE
M
ANUAL
3 - 17