Leckey BeMe User Manual page 95

SECTION 17.16:
ATTACHING AND
DETACHING HEADREST
COVER
To attach the headrest cover, align the
headrest cover with the front of the moulding
and wrap the cover over both ends
securing in place with the zips
align the cover so that the zip is closest to the
bottom edge.
To detach the headrest cover, reverse the
process.
SECTION 17.17:
ATTACHING AND
DETACHING FOOTREST
COVER
To attach the footrest cover, first remove any
hardware or straps that are attached to the
, footrest. Place the footrest cover onto the top
. Ensure to surface of the footrest, at the rear
the cover, over the top surface of the footrest,
so that the raised sides of the cover align with
the back and sides of the footrest. Secure on
the underside using the Velcro straps
To detach the footrest cover, reverse the
process.
Leckey BeMe User Manual p95
. Place
.