Leckey BeMe User Manual page 47

To detach the femoral bars, reverse the
process.
E
F
Leckey BeMe User Manual p47
SECTION 16.4:
ATTACHING AND
DETACHING LEG STEM
Before attaching the upper leg stem
ensure the clamp
the round boss of the upper leg stem into the
clamp from the inside face and re-tighten the
clamp , using the Allen key.
It may be required to adjust the position of the
femoral bar to allow for the upper leg clamp
to be inserted. To do this, loosen the bolt
, on the underside of the seat base, and move
to a suitable position. In some setups, it may
also be required to remove the seat plate
as described in Section 16.5 ' A ttaching and
Detaching Basic, Split and Contoured Seat'.
To detach the upper leg stem, reverse
the process.
, is loosened. Then slot
,