Leckey BeMe User Manual page 59

SECTION 16.16:
ATTACHING AND
DETACHING SLIM
LATERAL
To attach the slim lateral to the lateral bracket,
first place the machined boss into the
corresponding slot in the slim lateral plastic
pad . Position this assembly against the
inside surface of the lateral bracket, so that the
bracket locates into the recess of the plastic
pad and the machined part locates in the slot
of the lateral bracket .
Leckey BeMe User Manual p59
Place the split washer, then the plane washer
onto the bolt and pass it through the threaded
hole in the machined part
with the Allen key.
To detach the slim lateral, reverse the process.
. Secure in place