Leckey BeMe User Manual page 77

SECTION 16.35:
ATTACHING AND
DETACHING DYNAMIC
BACK
To attach the dynamic backrest, the static
backrest plate must first be removed. Remove
the two top and back bolts
the cover moulding. Remove the central bolt,
, and the static backrest plate
, and remove
.
Leckey BeMe User Manual p77
Align the holes of the aluminium bracket of
the dynamic back assembly
on the seat base. Secure using the five bolts
E
provided .
Rotate the dynamic back assembly around
so that the holes in the aluminium block align,
and secure using the two bolts provided
Use caution when assembling
and fitting the dynamic backrest
as there is a minor risk of finger
nipping.
, with the holes
E
F
.
F