Leckey BeMe User Manual page 16

p16 Leckey BeMe User Manual
SECTION 9.5:
ADJUSTING PELVIC
CRADLE
The pelvic cradle can be tightened or
loosened for user comfort and pelvic stability
using the grey webbing at the front
flip down locks at the side
1
2
1
, or the
2
.
SECTION 9.6:
CHASSIS HEIGHT
ADJUSTMENT –
GAS SPRING
For safety, the height adjustment pedal on the
chassis should be locked by engaging the pull
pin , on the right-hand side of the pedal. To
unlock, pull the pin out and rotate 90 degrees.
The pedal can then be operated.
You can carry out this adjustment with the
child in the chair. To adjust the height of the
high-Low chassis, press the foot lever
the rear of the chassis whilst holding the push
handle . Once you remove your foot from
the pedal the seat will be fixed at the chosen
height.
You should reengage the safety pin after
using the high-low function.
, at