Leckey BeMe User Manual page 100

p100 Leckey BeMe User Manual
SECTION 18.2:
ADJUSTING SEAT
DEPTH AND LEG ANGLE
(ABDUCTION AND
ADDUCTION) ON SPLIT
SEAT
To adjust the seat depth and leg angle on the
split seat, loosen the left and right bolts
on the underside of the seat base and move
each seat leg component separately to a
suitable position. The seat leg components
can be moved forward, backwards and to 15
degrees abduction/adduction. Tighten both
bolts to secure in place.
SECTION 18.3:
ADJUSTING
SEAT DEPTH ON
CONTOURED SEAT
To adjust the seat depth of the contoured
seat, first remove the contoured cushion
assembly
the covers and foam. Loosen the bolts
either side of the plate and slide forward and
,
backwards to the desired position. Tighten
the bolts to secure in place.
, from the seat base, and remove
, at