Leckey BeMe User Manual page 27

SECTION 9.19:
OPERATING FLIP AWAY
FOOTPLATE
To flip up the one-piece footplate, locate the
plunger , on the underside of the footplate
and pull the plunger outwards to release the
pin. Rotate the footplate upwards
release the plunger, the pin will locate in an
upward locking position.
To drop down the one-piece footplate,
reverse the process.
The individual footplates do not have a
locking mechanism. To flip the individual
footplates up, simply rotate each footplate
into an upward position.
SECTION 9.20:
ADJUSTING SANDALS
To position the user's feet in the sandals,
secure the Velcro straps provided so the foot
is held in place. The straps should be placed
over the bridge of the foot
toes
, and
one of two slots on either side of the sandals,
depending on the size of the user's feet.
To adjust the sandal position on the footplate,
loosen the knob
position
place.
Leckey BeMe User Manual p27
. The front strap can be fed through
If the child is wearing sandals or
light footwear check the straps
to make sure the webbing does
not irritate the skin.
, and move to the desired
. Tighten the knob to secure in
, and over the