Leckey BeMe User Manual page 15

SECTION 9.4:
ATTACHING,
DETACHING AND
ADJUSTING 2-POINT
BELT
To attach the 2-point belt, pass the grey
webbing through the upper slot in the
seat moulding , and then through the
cam buckle . Pull the webbing taught
and secure the cam buckles. Ensure belt is
orientated with padding facing towards child.
Attach the buckle
secure the user.
Always attached the pelvic strap
first before making any other
adjustments.
, at the front to
Leckey BeMe User Manual p15
To detach the 2-point belt, reverse the
process.
Safety Information: You must
ensure when using the 2-point
belt that the webbing is fed
through the slot in the seat core (not over
the seat core). This is also recommended
when using the 4-point belt.